Post Curing

Before you can safely handle resin miniatures, you must post cure the prints.

How to Post Cure Resin Prints

1. Make sure the prints are 100% clean and 100% dry.
2. Post cure the print with UV light for the amount of time specified by the resin manufacturer.
3. Rotate the model during post cure to achieve a uniform cure on all surfaces.

Tips

• If using sunlight to post cure 3D prints, you will most likely need to increase the amount of time.
• If your prints feel tacky after post curing, you either need to post cure the model longer or didn't clean and dry the model well enough.